Metal Roof Coating Services in Norfolk

Often. A plant can have pitched steel that takes acrylic and a flat section behind a parapet that needs silicone, and a church can have shingles on the sanctuary and steel on a garage.

We price each roof area with the system that fits it, so a single proposal can carry two or three line items, one per roof section, with its own thickness and repairs.

Most steel shops start with commercial metal roof coating, since loose screws and open laps are the usual leaks. Shops with no insulation lean toward spray foam, low spots that hold water get silicone, and offices on the same lot with shingles get a shingle coating.

Size, weather, and repairs set it. A small shop roof with little rust can be washed, sealed, and coated over a few dry days, while a large plant roof with many penetrations runs in sections over a longer stretch. Rain, dew, and cold mornings stop work, so schedules flex with the forecast.

Coatings and foam need dry roofs and temperatures above the product label minimums, so most work runs from late spring through early fall. Winter is a good time for inspections and proposals, so the job can start as soon as the weather turns.

Coating stops leaks that come through the roof surface: laps, screws, small rust holes once primed, and cracked flashing that gets rebuilt. Leaks from a failed gutter, a wall, a window, or a rooftop unit itself need their own repair, and we point those out on the inspection so the coating gets credit only for what it fixes.

Keep drains and gutters clear, have the roof looked at after hail, and fix small cuts with the same coating product. When the film wears thin, the roof gets cleaned and recoated instead of replaced.

That depends on the system, the thickness applied, and how the roof is kept up. Manufacturers rate coatings by product and film thickness, and ponding, hail, and foot traffic all shorten that span. Recoating before the film wears through keeps the base system working.

Coatings work over steel, many flat roofs, spray foam, and intact asphalt shingles. Roofs with widespread rust-through, soft decks, or soaked insulation need repair or replacement first, and the inspection tells you which.